대괄호 안에 설정은 default, GNR-AP 통바

Socket Configuration → Processor Configuration

→ Hardware Prefetcher [Enable] - MLC Streamer Prefetcher (MSR 1A4h Bit[0])

→ Adjacent Cache Prefetcher [Enable] - MLC Spatial Prefetcher (MSR 1A4h Bit[1])

→ DCU Streamer Prefetcher [Auto] - DCU streamer prefetcher is an L1 data cache prefetcher (MSR 1A4h [2]). Auto will skip the register programming and keep the hardware default setting.

→ DCU IP Prefetcher [Enable] - DCU IP prefetcher is an L1 data cache prefetcher (MSR 1A4h [3])

→ LLC Prefetch [Disable] - Enable/Disable LLC Prefetch on all threads

→ Homeless Prefetch [Auto] - Enable/Disable Homeless Prefetch on all threads, Auto will skip the register programming and keep the hardware default setting.

→ FB Thread Slicing [Disable] - Enable/Disable FB (Fill Buffer) Thread Slicing per thread

→ AMP Prefetch [Enable] - Set to enable or disable MLC AMP prefetch (MSR 1A4h [5]).

→ Lowest APICID as BSP [Enable]

→ APIC Physical Mode [Disable]

Socket Configuration → Uncore Configuration → Uncore General Configuration

→ XRT Remote Prefetch [Auto] - XRT Remote Prefetch

→ KTI Prefetch [Auto] - KTI Prefetch, Auto - Auto decides based on Si Compatibility

→ RdCur for XRT Prefetch [Auto] - Enable - Set the suppress_mem_rd_prefetch_rdcur, Disable - Reset it, Auto - Auto decides based on Si Compatibility.

→ XRT Prefetch [Auto] - XRT Prefetch, Auto - Auto decides based on Si Compatibility.